I tried searching for this link to see if it had already been posted, but the search engine here just returns pretty much every thread in the subsection.
So here it is anyway:
What this guide aids you to do is ditch the dumbdumb pressure settings of the Wacom drivers and make your own manually along a three-point curve.
So for example, though before you could select "Soft" settings, it didn't change the fact that you still had to press super hard to get to that 1024st level of sensitivity.
But by following the guide, you can change these to anything you want, and set the middle point wherever you please. I opted to keep a linear pressure setting, and to reduce the nullified pressure from 40 to 10 so that, just as with real media, if I touch the stylus to the Cintiq super lightly then I get a correspondingly super light line. I don't know for certain whether the "click threshold" setting of Wacom's driver lets me reduce as much as I did; it doesn't seem as if it did.
So now my pressure curve is as follows:
10, 409, 818
which means I only have to use about 80 percent of the same force upon the stylus I was using before to reach full pressure.
Now it's so much easier to play with the whole range. It's really made using the Cintiq feel a lot more natural, and it makes calibration within programs easier too.
Righto, have fun, keep well hydrated, try baking your own pizza it's so much cheaper than buying, exfoliate at least once a week, take it easy, bye.