Join 500,000+ Artists
Its' free and it takes less than 10 seconds!
Always glad to help Especially since I love your stuff!
Yeah I use a basic round brush in photoshop, this allows me to quickly change the overall hardness of the brush with ctrl+[ and ctrl+]. Generally I like to block at full or near full hardness, a little softer for finer rendering and much softer for blending.
Figured I might as well upload the brush and save you some trouble
I have a few settings on, I find this is the most efficient and most natural feel for me - allows me to vary how much paint I put down not only with pressure but with speed. The settings I usually use are as such; size to pressure, minimum size to 70% (lower and I find it harder to control when blending), opacity and flow to pen pressure, manual opacity always at 100% and flow I have lately had at 40%. Think of flow as controlling how much paint comes out in relation to time, very handy for finer control.
I'm not sure what you meant by thin, I think maybe you might set your tablet up to a "softer" feel so you don't have to press hard to get full opacity - it's better for your arms too, we have to worry about carpal tunnel and other RSI enough
I'm not surprised you jump between Painter and PS, I did too. I find it really difficult to get the edges I want in Painter, really you need at least two brushes - one soft and one hard to get what you want. You really can't beat PS's color editing either.
Let me know if this helps and if I can try to help you out with anything else
(It's 7am and I haven't slept so it might not make any sense...)
thank you very much for posting these demos,
one of the goals i have for this year is to get more into painting (the others are awesome things like "build more muscles on your body" and "only smoke SOMETIMES" ) and i think these psds and your steps will really be a huge help!
Cool man, just hop to it. I recommend you balance things you really enjoy doing and studies like the figures and portraits above (which I actually enjoy doing now too ) They are extremely helpful in developing your eye as well as learning to draw or paint in any medium I believe.
"Oh and quit smoking, it builds muscles if you quit and makes you draw so much better I swear."
Dr. Makinthiscrapupsoyouwillquit MD
Thanks for them brushes man! They really help. What size and res do u use on your canvas? maybe an odd question but I cant find to sttle for a good resolution. Thanks again man.
Cheers! Oh, and draw a bear its good for your heart and soul!
Color Figure Demo, Process and PSD:
Color figure study from ref. Crutches used: side by side with photo reference; use of level lines when needed to check proportions.
PSD: Lots more steps inside
Happy to answer any questions you might have
Thanks again Idiot for the update.
Alway good to look and and learn from your stuff
TEACH ME ABOUT COLOUR DAMMIT!
argh warm cool, saturation, hue, value....
nah mainly I get confused about choosing colours , especially in regard to shadows relating to the light source etc..
Hmm, that's all semi-general; specific questions are the best
If I understand correctly, you want to know how to choose a shadow color in relation to the full-light color? If so ..
First you need to know that less light equals less value, more light equals more value. Value is king in describing form and distinguishing shapes. Edges are queen but that's a different story. Next you need to know what light is present in the shadow. You would be unable to see it if there was no light present. If there is truly just one light source and the environment was white - I believe the only difference you would see would be with value. However this is rarely if ever the case. Outdoors for example there is little running from the largest secondary light source there is, the sky. Any interference, be it secondary lighting or reflected lighting of a different hue will cause a decrease in saturation; indeed think of saturation as a measure of purity. Once you have calculated the value and saturation levels the proper hue is simple mixing - pull out a color wheel and tell me what happens when you mix yellow with blue.
I've set up several exercises in the Peer Project just to teach this sort of thing, namely exercises 3 and 4 - but check out the rest as well; won't hurt.
Any more questions or follow up questions please let me know
Creating Seamless Textures for Use with Brushes
1. Grab the source pic from http://www.imageafter.com/image.php?...fabrics095.jpg . Imageafter.com is a great site, be sure and check out their texture section. Open photo in Photoshop and with the crop tool select as much similar texture as possible, not here I've blocked out all the borders as they would be very recognizable in a repeating pattern. I've also ticked perspective in the tool bar for a quick rotation and maximization of texture area. Any distortion will be neglibile if done right.
2. Let's not kid ourselves, we're artists - crap at math. Under canvas size I crop again, this time by pixel in order to get some nice even numbers which I will be dividing by half in a moment. No one is going to mix an area of 3x2px are they?
3. Select under the filters menu Other>Offset
4. Remember when we cropped the canvas from before? Come on, that was 2 steps ago! Divide total length and total width by 2 and input them here. Make sure wrap around is selected!
5. The healing brush is perfect for filling in seams. Reminds me a lot of welding actually. Anyways - I still haven't got the hang of it and needed to use the clone stamp to go over a few ugly bits.
6. All done. Can barely see the seams, it's not the best job - but we're not using the photo, we're using it's texture. Things like the lighter band will show up in repition, however this file is rather large and the way the texture is used it shouldn't be too noticible.
7. After you have selected everything (Ctrl+A) Proceed under the Edit Menu and select Define Pattern.
8. A dialog will pop up, name it whatever you want. I think this is like italian for canvas or something ...
9. I'm going to use this texture on my favorite round brush. Minimum diameter is set to 70%, not too small - not too big.
10. I prefer to have opacity and flow to pen pressure on just about everything. I practically never touch manual opacity but manual flow is very handy.
11. Ok, back on topic! Tick the texture box and select our new texture. (Lil' downward pointing triangle next to invert.) Set Mode to Subtract (But please play around with the other modes and see how you like it!) Invert is selected because I think it looks better - more like paint that get's stuck between the texture rather than the texture of the canvas itself.
12. Save your new brush!
13. The end. Pat yourself on the back.
I can't thank you enough
you just saved me a hell lot of trial and error time to figure out how those pattern things work
if I was a hot female I'd so kiss you on the cheek!
friends Sketchbooks:Dile_, Stine
my flickr go there if you want to see my photography stuff
<mildly sarcastic remark that seems a little cutting at first read, but contains wisdom and is really rather funny>
Ilaekae: "I'm sick and tired of "purists" who dictate their own anal preoccupations to everybody else as the word of gods."
If found another thread from you, for sure i would write a THANKS message, subscribe and put 5 stars. Seems like dejavu this week.
Wee! Thanks for the walkthrough for the brush creation. I now have a new brush. I've downloaded the PSD files, and will get to those when I can get a moment of time. Thanks!
Infinit: My pleasure homey. Man, you really should be a hot female.
Cwn Annwn: Aww, I you too. Hope this garbage makes some sense
Utum: I have a few more you know Thanks much!
Asatira: My pleasure, have fun!
DIMAGYAN: Thanks much, glad you are enjoying this compost heap.
MeTaL-Mike: Yeah dunno what that is all about: new link - http://www.divshare.com/download/2221633-d96
Going to put up some video demo's tommorow or so... Just have to get a few files I left at work
MeTaL-Mike: My pleasure dude and thanks very much. New demo time!
ICH: Yeah? Did those crappy brushes ruin your painting? Cheers!
ikuru: Thanks man! I will try and drop by, but it's probably easier if you have specific questions - ask all you want in here
Demo Twenty Four!
3 Simple 30 minute Sketches:
Concentrating on simple techniques and process as well as the "remix" technique.
Full Resolution Lossless Codec Video: CLICK
Full Resolution Xvid Codec Video: CLICK
Full Resolution Xvid Codec Video: CLICK