Results 1 to 13 of 21
Thread: Starfighter - WIP
May 5th, 2005 #1
Starfighter - WIP
Hello. This is a model I am currently working on for a short class production. The production will be a short, star wars-esqe establishing shot with a fleet of ships (ranging from massive to tiny) traveling over a planet. This model is one of the smaller ships, a single star fighter.
I began with a concept sketch:
I made slight design changes as I modelled, but I feel I achieved the look of the sketch overall. Here are some wires of the model:
3/4 Front and Back:
Having completed the model, I've begun on the texturing process. Obviously, I've only just started on the main hull of the ship at this point. You may also notice from the front 3/4 view that the texture is mirroring on left and right. This is the result of how I chose to texture this model, but I will create a new map for the other side, so don't worry. Here are some shots of the texture in progress:
Due to the schedule of this class project, I am attempting to finish the texture of this model by this time next week, so I'll keep you posted on the progress. In the meantime, any C&C, especially concerning the texture, is welcomed and appreciated. Thanks for your time!
Last edited by Woodrodius; May 6th, 2005 at 01:59 AM."Undermine their pompous authority, reject their moral standards, make anarchy and disorder your trademarks. Cause as much chaos and disruption as possible but donít let them take you ALIVE"
Hide this ad by registering as a memberMay 5th, 2005 #2
what program are you using to model it?
No. No. Uh uh. No way. Ain't happening.
alright, gimme a sec.
May 5th, 2005 #3
Oops, totally forgot to mention that. It's modelled in 3D Studio Max 7. Textures are done in photoshop.
"Undermine their pompous authority, reject their moral standards, make anarchy and disorder your trademarks. Cause as much chaos and disruption as possible but donít let them take you ALIVE"
May 5th, 2005 #4
A little update, the texture on the bottom of the hull is complete:
More texture work progression:
Last edited by Woodrodius; May 6th, 2005 at 02:00 AM."Undermine their pompous authority, reject their moral standards, make anarchy and disorder your trademarks. Cause as much chaos and disruption as possible but donít let them take you ALIVE"
May 7th, 2005 #5
May 7th, 2005 #6
May 7th, 2005 #7Registered User
- Join Date
- Oct 2004
- Thanked 0 Times in 0 Posts
I think that you started texturing before you finished the model. So I'll divide my critiques into two categories; model and texture.
As you said yourself in your first post: "I made slight design changes as I modelled". The problem as I see it is that you have missed many of the small details in the sketch (around the top thrusters, all the little indents on the body and some fairly complex scribbles in the middle where the "scales" overlaps) and that you have simplified a lot of the bigger pieces. This is very obvious on the cannon and the dual back-thrusters that are way off-sketch. Also, why did you change the profile? I liked the concept better with it's thinner body and indent under the engine. All in all, a decent model that doesn't reach it's full potential due to the fact that you didn't stick with your great concept.
This might be because the model is intended for, as you wrote "The production will be a short, star wars-esqe" but why, why the standard panel texture? You have a fairly invovative model and you decide to cheapen (for me) it's impact with a staple texture, can't say that I like that. You need some more variation in your panels, right now they all have the same values and depth. Link to a Star Wars modeling site to give you some ideas on how to create some variation:
You really need some more detail around the lens(?), a simple colorchange isn't going to cut it.
Check your concept. Since you didn't model a lot of your detail, put it into the texture.
I sound very negative in this post, it's not because I hate your work but it's because I think that you are wasting a intriguing concept.
May 7th, 2005 #8
Thanks for the C&C guys, although I'm not sure I agree with all that you said Cubik. It's not that I don't appreciate the criticism, it's just that in this case, I honestly don't agree with it. I don't think I changed the shape of the model enough to consider it a "waste of a concept", and I can't say I agree that using paneling in your texture makes it "staple". I'm actually quite happy with the shape. However, thanks for the website, the textures there are great and are quite inspiring!
Anyways, here are some updates on the texture:
Engine and blast shield:
May 7th, 2005 #9
This is a really cool design for a ship. I too would like to see a little more detail in the actual model, and I have to agree that the model isn't as good as the concept sketch... but all in all it's looking great.
Last edited by CruShTinbOX; May 7th, 2005 at 11:27 PM.
May 8th, 2005 #10
Another small update:
May 8th, 2005 #11
I have to say that while it does look good, I will agree and say the concept ship looked better then it's model incarnation. I do agree with how you are texturing it tho. I think it fits it perfectly! Keep it up!
Perhaps you could do a quick "how I made this", and some more info about making large scenes for us noobs...
Crappy stuff by me!
Please check it out and drop advice, tell me what I'm doing wrong, and suggest things to learn!!!
May 8th, 2005 #12
The texture is completed, at least for the intents and purposes of this short. However, when I have more time, I plan on remapping the other side so that the texture isn't simply mirrored. I've also included some renders with the lighting I'm experimenting with. Enjoy!
PS: What kind of "how I did this" would you like? Modelling? Texturing? Lighting? If I get some more time, I'll try and put something together for you.
Last edited by Woodrodius; May 8th, 2005 at 10:05 PM.
May 10th, 2005 #13
im a beginner in 3d modeling, so any help on anything would help. i am very interested in the modeling tricks, thanks.
No. No. Uh uh. No way. Ain't happening.
alright, gimme a sec.