Art: Peter Chung on Japanese Animation Theory
Join the #1 Art Workshop - LevelUpJoin Premium Art Workshop

Results 1 to 2 of 2

Thread: Peter Chung on Japanese Animation Theory

  1. #1
    Join Date
    Apr 2009
    Location
    NJ
    Posts
    347
    Thanks
    23
    Thanked 107 Times in 91 Posts
    Follows
    0
    Following
    0

    Peter Chung on Japanese Animation Theory

    I was browsing AniPages forums recently and came across this thread in which Peter Chung (The Animatrix, Aeon Flux) weighed in on Japanese animation and the difference between the goals and production styles in Japanese and American animation.

    I've quoted some of the best parts here, but the whole thread is worth reading: http://www.pelleas.net/forum/viewtop...539f3&start=15

    Japanese animation theory. I could probably write a book on the subject, so I'll try to keep it down to the basics.

    It's very easy for even a casual viewer to notice that Japanese animation has a different "feel" than American animation. Usually the difference is attributed to a divergent cultural viewpoint.
    What most viewers don't realize is how much it actually comes down to the physical differences in the technical processes.

    To start with, on the cultural side, the main difference is that Japanese animation comes out of a completely different tradition of representation in art and performance. Western classicism is based on the strict adherence to realism, rendering the artist (and the process) invisible in order to elevate the subject. Classicist painting values the creation of an illusion. A painting should make the viewer forget he is looking at oil on canvas, and reveal its subject as if through a window on reality. Brush strokes must be blended so no trace of the artist's toil is evident. Western theatrical performance is likewise realist, defining a character through individuality, unique traits specific to period and setting. Japanese theatre and art, on the other hand, would fit the definition of "modernist" in Western culture. Asian painting is stylized, impressionistic (and expressionistic), concerned entirley with displaying the brush stroke and the flat, graphic nature of the picture plane. Japanese performance-- kabuki, noh, bunraku-- is similarly stylized, and more focused on capturing a distillation of character than emotional versimilitude.

    This approach to representation carries over to animation. We can think of Japanese animation as an extension of Bunraku, using current technology. As in Bunraku, there is no attempt to create a seamless illusion of reality. The figures of the human performers can be seen manipulating the puppets. Likewise, the hand of the animator in Japanese aniimation is not only noticeable, it is often highlighted. (And this site seems curiously dedicated to cataloguing the signs to recognizing such individual animators' handprints.)

    One reason why many young artists (including myself at one time) are attracted to Japanese animation and may be inspired to emulate it is that you can see how it is done. You can easily see it is composed of individual drawings, and for that reason, it seems within one's reach. In classical animation (I will call traditional Disney animation "classical" from here on), to allow the viewer to notice he is looking at a drawing is a cardinal sin. In classical animation, even held poses were traced over and over to make them "breathe". These are called "moving holds".

    In classical American animation, the animator's hand must not be noticeable. The focus is entirely on the character and in the illusion that it is a living, breathing creature. From a Western animator's perspective, it is NOT praise to say "I noticed how well you animated that scene." That is a statement of failure. It means that the animation drew attention to itself. That is the basic violation of classicist representation in Western art, and of "classical" American animation. John Lasseter puts it clearly when he says he prefers the animation of Frank Thomas to that of Milt Kahl. You can tell a scene animated by Kahl. Thomas's efforts disappear into the performance, like a good actor's. That is THE major difference between Japanese animation theory and Disney.

    Onto the technical side of things, here's just the start of a list of the main differences:

    1. Looped as opposed to pre-recorded dialogue. Most casual viewers notice this right away. What's not obvious is how this affects the director's approach to staging dialogue scenes. The American director will focus on the character's performance as he delivers the dialogue, to the exclusion of other factors in a scene, such as environment, lighting, camera angle and movement, and other incidental details. The Japanese director tends to do the opposite. Both tendencies have their good and bad points. The evolution of most current Japanese animated character design derives from the need to cover the imprecision of their lipsync. It has resulted in the tiny mouths and tapered chins of so many "cute" lead characters, since drawing them that way allows animators to use fewer mouth poses and not to animate the jaw during dialogue. Spoken Japanese is made up of fewer phonemes than Western languages, so it also easier to get away with less precise lipsync.

    2. Role of the director.
    In a lot of well-known cases (Miyazaki, Rin Taro, Kawajiri, Kon, Oshii), the kantoku draws the entire storyboard himself.
    The director is usually the kantoku, but depending on the individual, he might be a glorified scene checker, in which case, his job is called "enshutsu". For a time, a large number of Japanese animation directors started their careers not as animators, designers, or even storyboard artists, but as checkers (satsudashi). I'm not sure if this is true anymore, as the importance of the checker has been diminished by the transition to digital photography.

    3. Studio organization. The division of genga and douga. (Genga means "original drawing". Douga means "moving drawing".) Apart from the Sakkan, that's all there is. Sometimes, the sakkan's role is so important that he may even be paid more than the director. The job doesn't exist in an American studio.

    The American feature animation studio is broken down into so many job categories, it is hard to keep them all straight. Supervising character lead animator, character animator, character assistant, character breakdown, rough inbetweener, inbetweener, lead cleanup, key assistant clean-up, assistant clean-up, effects animator, key effects breakdown, effects assistant and on and on. The most important difference is that Japanese animators are assigned sequences. They animate every element in a given sequence of scenes. Sometimes that includes characters, props, vehicles, machinery, animals, effects, shadows, backgrounds (if they move). American feature animators are cast by character. They will often have to "perform" with other animators on the same scene. The prince, the princess, the villain, extras, shadows, and any effects involved, will all be drawn by different animators, according to their specialty, even if they occur together in one layout.

    4. Top pegs-- American animators bottom- peg their drawings onto a fixed pegbar attached to a rotating disc, which usually sits on a light desk tilted at a steep angle, like an easel. This enables them to use their free hand to "roll" their drawings as they work, which they do frequently to check the flow of motion. Japanese animators top-peg their drawings to a simple unattached pegbar which needs to sit on a near- horizontal surface. They flip their scene to check the action only occasionally, as they have to lift the stack of sheets up off the pegs. The Japanese animator is involved in a more mental (or intellectual) process, calculating the result in his head. The American animator is working more by "feel", or instinct, checking and rechecking it for fluidity constantly as he draws.

    5. Exposure sheets- This one is very arcane, and its influence is tenuous, but I believe it is real. Japanese animators label their drawings according to which level they belong to. The 'A' cel is on the bottom, 'B' is second, 'C' is third, etc. American animators label drawings according to content. A drawing of a cat, for example, will be labeled 'C', and which level it occurs on the X-sheet will not change its designation. That character will always be 'C'. Japanese animators number their key drawings in sequential order regardless of how many drawings will ultimately be used to inbetween the scene. It is up to the inbetweener to change the numbering to the actual cel count when he traces the key drawings. I believe this system has been devised to make calculating cel counts easier, as it eliminates the possiblity of either gaps in the numbers or extra numbers, as in 5 1/2, or 5a, 5b, etc. For a key animator who decides to add a lot of rough breakdowns, this can result in a bewildering code for the inbetweener to decipher, as he must label the extra poses with katakana letters.

    6. Pay calculation-- This has a huge impact on the entire approach to production in ways too arcane to explain fully to anyone who hasn't worked as an animator in a Japanese style studio. Key animators are paid by the cut (scene). Inbetweeners are paid by the sheet. It doesn't cost more for an inbetweener to spend longer on a drawing, resulting in a tendency to produce a lower count of very detailed drawings rather than a higher count of simple ones.

    That's just the beginning of a discussion on the topic. I'll be happy to answer more specific questions as best as I can.
    When animation used to be shot on 35mm film, the type of pegbar setup the animator used had a great influence on how the camera was used. The American style disc has two pegbars at the top and bottom which could slide left to right for sliding cel levels. The pegbars have increments in inches, with the smallest units being .05". These correspond to the increments on the camera stand, though the cameras were capable of finer movement. The animator then wrote down on his exposure sheet (x-sheet) the amount the camera was to move for each frame. The goal was, as you say, accuracy.

    The Japanese pegbar is a simple flat strip of metal with registration pegs. The approach is to simply eyeball everything. Instructions for camera moves were drawn in lines (or curves) with increments drawn freehand as the animator saw fit for each move. The cameraman would use these guides to move the camera accordingly. The pegbars on a Japanese optical camera were not attached to the camera bed, allowing backgrounds to be moved freely underneath. This opened up a greater range of movement for shots like flying scenes, but would also result in less precision in simple panning walking cycles, where the feet wouldn't be properly anchored on the background. Sliding foot syndrome.

    All this is obsolete today, as all camerawork is done digitally. The camera, lenses and filters are completely unrestricted in their range. A current pet peeve of mine with Japanese animation trends is the tendency to mimic live action cinematography with overuse of hand-held "shakycam", diffusion filters, focus pulls, etc (made possible by the digital camera). Ironically, such stylization is not so much the achievement of greater realism, but of greater artifice. Directors who use such techniques are not reflecting natural experience, but exploiting tropes derived from the particular idiosyncracies of the live action camera (which has little to do with how we perceive the real world). We are used to seeing such camerawork in live action, so they hope to fool the brain into thinking that their animation is as real as a live action film. Which is self-defeating. Animation, no matter how well crafted, can never represent the real world better than live-action. Animation is best used to portray a different kind of reality, not the objective external world, but the subjective, personal vision of the artist.

    I will address Leedar's question later, as that is a pretty complicated matter to try to describe in words.

    As for Korean studios, they were traditionally set up to either do subcontract work for Japanese or American producer clients. (There are increasing numbers of domestic Korean productions too, and these are modelled after the Japanese system, since it costs less.) Most Korean animators have experience in both methods. The best Korean animators prefer to work on American shows, since they pay better and they are allowed to use more cels-- that is why the Korean animators who do work on Japanese productions are not usually representative of good Korean animation (to address Ben's perennial gripe.)
    I can't say exactly when the sakkan system became standardized, but my guess would be some time during the mid 60s, when TV animation production was starting to take off in a big way. I remember seeing episodes of Marine Boy as a kid and being fascinated by the fact that the drawing style for a particular episode would be different from others, yet look completely consistent within itself. As if one artist had drawn the entire episode by himself. I later learned it was the sakkan who made this possible.

    In credits, sakkan is usually translated into English as animation director, and that is good enough for the general animation fan. However, his job is quite different from that of animation director in an American production. In many cases, ideally, the sakkan is also the character designer.

    Sakkan is short for Sakuga Kantoku, which literally means "work-drawing director". If I can be allowed a bit of leeway in interpreting the term, when I say "work-drawing", I might compare it to the term "workprint" in general filmmaking,. That is, an artifact of production which is not the finished product, but a stage of the work-in-progress that is never seen by the audience.

    In Japan, the layouts are usually drawn by the same animators who will eventually be animating the scene. The layouts are handed in and go through a series of checks- once by the director, then by the sakkan. The sakkan at this stage makes any corrections in composition, posing and perspective, then the scene is sent back to the animator.

    When the key animation drawings, the genga, are done, they go through a second series of checks-- the director looks at them, makes notes, then it goes back again to the sakkan for correction.
    This is what the sakkan does: after flipping the drawings to decide what needs to be corrected, he pegs the first piece of genga on his desk, then pegs a blank colored (usually yellow) sheet over it He picks out the problem areas and draws over them with a clean line, making sure his new lines dovetail into the shapes of the usable parts of the genga. He places the next drawing down and repeats the process until he has corrected the entire stack. The trick is in making sure that the original parts work with the corrected parts, but also to make sure that the corrected parts also work between themselves. It's a bit like playing 3-dimensional chess.

    The colored paper identifies the sakkan's work immediately. It is up to the douga (inbetweener) to combine the sakkan's lines with the usable parts of the genga onto one final, cleaned up sheet. I have seen cases where there are multiple sakkans on a project and a chief sakkan (or director) might make additional corrections (on yet another different color paper) on a sakkan's corrections over a piece of genga. On projects where robots or vehicles are featured prominently, there may be a separate sakkan that specializes in that (mecha sakkan). Sometimes, if the original genga is completely unusable, the sakkan redraws every piece of genga himself. The highly skilled ones are able to do this without any roughs of their own, in a sense, using the bad genga as the preliminary draft and drawing perfectly clean key animation in one pass. The genga is usually not sent back to the animator unless he has totally misinterpreted the scene. It is usually faster for the sakkan to simply redo it than call for a retake.

    In any given studio, there is usually a small handfull of very talented animators and lots of mediocre ones. The sakkan system enables the studio to maximize the output of their best artists while allowing the average artists to do most of the grunt work. Most of the hours that go into animating a scene happen at the beginning, as the animator has to work out technical matters such as cel levels, camera instructions, perspective, and registering elements to the background.
    By using the sakkan's skills only where they are needed most, the studio can give every scene the same degree of polish without having to waste the sakkan's time on drudgery.

    Having said that, the sakkan's job is the most stressfull and demanding of anyone's on the crew. An ordinary scene can not usually be made excellent with a last-minute fix. A sakkan's effort salvages animation that would otherwise be unacceptable, or bring substandard work at least to a level on par with the rest of the work. That is why his job is so frustrating. A sakkan is usually skilled enough to be able to produce excellence if allowed to simply animate from scratch. However, he must spend his time trying to redeem the failures of lesser artists. It takes a very special type of personality to make a good sakkan. I doubt many American animators would have the temperament. Not because of any lack of skill, but because it would drive them crazy.
    There's a lot of misinformation about Japanese animation floating out there. Anipages is the one place where I've found the information to be sound and the fans earnest about appreciating the artform, so I decided to post here. There is even a lot of misconceptions on the part of American animation professionals regarding Japanese animation, but also the other way around. It blows Japanese animators' minds when they're told a feature film made in the U.S. can cost over $100 million to make.

    I'm making comparisons between the U.S. methods and the Japanese because it's hard to describe what makes Japanese animation different otherwise. (Different from what?)

    On the tiny mouths of characters, to be more accurate, it makes the fact that there are fewer poses less noticeable.

    When it comes to the job of the animation director, there is a very big difference between TV and feature animation in the U.S. Not so much in Japan. In Japan, current feature animation production is basically the same as their TV production, but with a higher budget.
    In TV, American directors write down all the timing instructions on their x-sheets before sending the scenes to the animators (usually to Korea). In American features, the system is not really standardized, and will differ according to the studio and the particular individuals involved. There was a tendency towards "directing animators" rather than "animation directors" (when they were still making 2D features). That reflects the emphasis on character, since "animation director" is too general.

    In Japan, animators start with completely blank x-sheets. The sakkan's job is to be the "fixer" after the animator finishes his part. His main role is to maintain consistency in the drawing, that is to put the characters on model. The system is very standardized across the industry. If you look at the end credits to Japanese features, you will see the involvement of a lot of different studios contributing everything from layouts to camera. For all the studios to be able to work together, there has to be a universal consistency in methods. This is also the reason why the Japanese industry was so slow to make the transition to digital. They all had to change together, including their subcontractors in Korea and China.

    There is no "always" in art. Specialization increases quality, but costs more. The Japanese understand that, but resist it for the sake of freedom and efficiency. (When possible, they do choose animators best suited for particular scenes.) Organizing by specialization takes longer to produce animation, therefore costs more money. Costing more money means that the films have to be more popular. That in turn means that creative freedom is restricted. Many Japanese studios and directors would prefer to have lower budgets and more freedom than higher budgets with less freedom. It seems that many American directors feel it is their job to make films that appeal to the maximum number of viewers. They would say that specialists are critical to achieving that goal.

    Richard Williams is unusual in his stance in favor of top pegs. Almost all American animators use bottom pegs nowadays. The fact is, that a good animator can work either way. I'd recommend beginners to learn on bottom pegs first. For me, it makes the process more enjoyable, but for that reason, it can become a crutch. You can end up needlessly rolling your drawings back and forth. These days, I use top pegs. I find it forces me to focus harder and I can work faster.

    The pay for key animation varies wildly, depending on the show. 2000 yen per cut sounds like the lowest end of the range, not the average. Probably shows like Anpanman do pay on that level. In Korea, American shows pay by the foot. (A unit that is meaningless today, but persists as part of the traditional professional lingo). Key animation on Nickelodeon's Avatar pays about 11000 won per foot ($11 currently). A 2 second cut is 3 feet (1.5 ft/sec). Most cuts are much longer. You can see why Korean animators don't want to work on Japanese shows.

    On the other hand, 200 yen per sheet of douga is about the current average as far as I know.
    Also, Peter Chung has met the best people:
    A couple of years later, while I was working at Disney studios, I had dinner with Frank Thomas and Ollie Johnston at Andy Gaskill's house with none other than Miyazaki Hayao as the special guest. I must have been 21 at the time. You see, at the time, I was a super hardcore Japanese animation nerd who wouldn't back down. I remember giving Disney animators their first glimpse at Miyazaki's stuff. I was actually surprised at the extremely positive reactions. Strange to think back on it all now...


    Reply With Quote Reply With Quote  

  2. The Following User Says Thank You to Ccs For This Useful Post:


  3. #2
    Join Date
    Apr 2012
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Follows
    0
    Following
    0
    This is interesting

    cuppycakes
    Reply With Quote Reply With Quote  

Members who have read this thread: 1

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •