Results 1 to 17 of 17
Thread: The Helghast are coming...:D:D
July 11th, 2009 #1
The Helghast are coming...:D:D
Its been a while since I've posted anything on here, But I thought I'd share my latest hopefull
A friend asked for a Helghast soldier from Killzone 2 on the ps3,I thought I wouldn't mind one myself, so here I am...slowly making progress.
Still loads of stuff to do, Need to shorten the neck a bit,make the gun,do the knee pads etc,Lips on the boots and various bits and bobs.
But I think its getting there.any way let me know what you think as hopefully it will the first sculpt I try and cast.
Hide this ad by registering as a memberJuly 11th, 2009 #2
Anyone got any ideas what I can use for the masks pipes that go to the breathing bits?
Thanks for looking
July 11th, 2009 #3
Great work, everything seems to be coming together nicely, as for what you can use for mask pipes, you could try using thin metal armature wire but I am sure you might have already thought of doing that. Looking forward to seeing the finished piece.
The Following User Says Thank You to Corpsehand For This Useful Post:
July 11th, 2009 #4
Hey, B-Splat. I'm just jumping in briefly before heading back to work (I'll have a more thorough response later on), but I wanted to give you some suggestions so you could start getting back to work on those breathing tubes.
I recommend strings from a bass guitar. They really do have the perfect look for covering a lot of hose/tube needs and you don't have to do too much hunting around to find the right size. One pack will cover your tube needs for a long while for small-scale work.
... a cry went up into the shuddering air, and faded to a shrill wailing, passing with the wind, a voice bodiless and thin that died, and was swallowed up, and was never heard again in that age of this world.
The Following User Says Thank You to KingUnicorn For This Useful Post:
July 12th, 2009 #5
July 13th, 2009 #6
Thanks Guys for the nice comments.
Still a long long ways to go,I have been a bit lazy with this but I'm gonna get back on it and try and get it finished.
Cheers for the help with the tubing, I like the idea of using bass strings! never thought of that. Only thing is not sure if they'll be thick enough, if not I may have to try mr monster's idea and wrap wire round wire!
Thanks again, I appreciate you looking in
July 13th, 2009 #7Registered User
- Join Date
- Oct 2005
- Thanked 1 Time in 1 Post
Wow, pretty awesome so far.
I especially like how you did the trousers. Pure Win!
I also have another idea for the tubing if the bass strings don't work out.
You could maybe use a spring from a ballpen and put some sculpey inside.
The Following User Says Thank You to André_the_giant For This Useful Post:
July 14th, 2009 #8
another brilliant idea for the tubes,(I'm currently "borrowing" some old ball point pens from work)
Thanks for the kind words
July 14th, 2009 #9
Do you do an armature blueprint before sculpting? The reason I ask is because you mentioned adjusting the neck. Everything I know about sculpting (witch is little) comes from John Brown sculpture videos. He draws an armature blue print that incorporates correct proportions. I have found it to be a life saver in my current sculpt. It also allows you to plan out removable parts for casting. The soldier is looking good. My only crit at this stage is the pants. They look way to wrinkly. If he wears a size 32 length, those pants are 42. Maybe less wrinkles in the crouch area. Keep us updated - thanks.
July 15th, 2009 #10
I do use a blueprint for the skeletol structure, I left the neck slightly long so I could cut it back to get the head fitting right, As the head is not attached yet until I decide which angle his head needs to be,Probably the long way round , but it seems to work for me
My plan is to get the gun in place first to make sure he is looking correctly.
Thanks for looking
July 15th, 2009 #11
After everyones helpful input for the pipes I need to bug you all again and ask for help with his gun
I tried using sculpy but where it was so small it ended up breaking and now I am sad because I am staring at some plasti card and it looks like it could take forever using that.
Does anyone have any hints or tips that I could use to make it?
The gun would be about 9.5cm long
As always, any help is greatfully appreciated
Heres the Reference pic:
July 16th, 2009 #12
That gun is gonna be tricky whatever way you slice it. I think you'll have to use a few different bits and sculpey then mold and cast it into one piece. This should prevent you having it break, and already save you a step if you were gonna cast this guy?
You might try browsing cheap toys, sometime you can modify their accessories to get you a step closer.
July 16th, 2009 #13
Hey Bongsplat - I don't know about the strength of sculpy, but the plasticine clay I use hardens nicely when froze. I saw a tutorial on sculpting little fingers (tiny) and it gave me this idea - create the gun bulk out of wire heat the clay to 95 degrees, scratch the wire with knife, add the clay around the wire in small amounts and then shoot it with air duster upside down (computer air duster). The difluoroethane in the air duster will freeze the clay immediately making it hard. Hope this helps
July 16th, 2009 #14
The Following User Says Thank You to Doggy For This Useful Post:
July 17th, 2009 #15
Thanks Guys for the help, I guess I'll be taking a trip into town tomorrow to see what I can rustle up!
I might get some epoxy putty to use,and perhaps rob some small children of their toys....Muha ha ha....LOL
Cheers for looking in
July 17th, 2009 #16
This is going to (already does) look amazing! Can't wait to see the finished product
July 20th, 2009 #17Registered User
- Join Date
- Jul 2009
- Thanked 0 Times in 0 Posts
If you still need to sculpt the rifle, try getting a toy FAMAS assault rifle of the same size and cutting it up, both rifles look very similar.
GI-Joe action figures would probably have a gun the right size.