Results 331 to 337 of 337
January 15th, 2014 #331
Thanks for the swift reply.
Thats interesting to think about. definetly laid those questions to rest.
I have another one.
I was researching atmospheric perspective. My hunch was that it increases exponentially as the distance travels back in space.
It has been described in places that the atmospheric particles decrease in amount exponentially the higher you get in the atmosphere.
However i couldnt find anything relating to distance along the z axis.
I figured it would be exponential for two reasons;
inverse square cube law / power law
and because of the height to amount relationship described above.
Then i stumbled across this;
The inverse square law mentioned in the comments doesn't really come into play here because the fall-off in light energy is exactly balanced by the reduction in apparent size of the object. (An object twice as far sends only a quarter of the light energy to the eye, but also only occupies a quarter of the visual area, so the light energy per area of the visual field is the same). -David briggs
It was from james gurneys blog.
Now i might be wrong, however i thought about this and thought,
Even if the light ENERGY is 1/4, the light INTENSITY is the same due to the strength of the light? So the light that reaches our eyes would be greater than if we calculated using the energy as our benchmark.
what do you think?
Also: just wondering do you know if/how LRV's (light reflectance values) relate to brightness or values? Just been wondering about the connection. can a connection be made?
Here is a study i did using a photo.
Last edited by Siphonophores; January 15th, 2014 at 03:33 PM.
Hide this ad by registering as a memberJanuary 18th, 2014 #332
With your spheres, wouldn't you expect the shadow side to be a different hue to the light side, given that there is probably a difference in colour between the sunlight and the light from the opposite side of the sky?
January 18th, 2014 #333
haha! Yea i think i was just confused with that. Thanks.
Also big thanks for this post. This just gave me a Huge leap in my thinking. I was getting confused between parameters.
Just got a few (well not so few) questions.
I found this definition and liked it i was wondering if you thought it was right?
standard theories of visual surface perception, for instance, posit that brightness (“perceived luminance”) and lightness (“perceived reflectance”) constitute the perceptual counterparts to the physical dimensions of luminance (light intensity physically registered by the eye) and diffuse surface reflectance (ratio of physically incident and reflected light intensity)
Also what do you think about this?
Anchoring theory assumes that lightness is a psychological continuum that extends upwards beyond the physically
possible reflectance range (0-1), and that high values on this continuum represent surfaces that appear to glow
Do you know about gamut relativity? What do you think about this theory?
A key aspect of gamut relativity is the redefinition of brightness and lightness as computationally defined modes, rather than dimensions, of vision. According to this view, the brightness mode corresponds to global anchoring (λ = 1) and the lightness mode to local anchoring (λ = 0).
Is blackness bias a principle we can use in painting? Would it apply in direct sunlight?
ALso The information on relative brightness was a real eye opener. Is there any info about the different value steps for the different colors? or any general rules?
hmmmm yea those spheres were a tough one. I think maybe the shadow would be a little colder due to the lessening light of the sky, but also with a slight warm band for the alpenglow.
Here are some more Studies i was doing, Though i did them before reading this post.
Also how would you deal with the three modes of vision in one picture? say there was a dark area then like a spotlight?
Last edited by Siphonophores; January 19th, 2014 at 02:27 PM.
October 29th, 2014 #334
The Theory of Colour - Lecture series, Art Gallery of New South Wales
For anyone who is in Sydney in November, you might be interested in this series of public lectures I'm giving for the Art Gallery of New South Wales. Please introduce yourself if you're a CAer!
The Theory of Colour
The idea that all colours are made from yellow, red and blue was widely accepted in science until the late nineteenth century, when it was overturned by a revolution in our understanding of colour. This new understanding not only led to modern colour printing, photography, and cinema, and eventually to digital photography, painting and rendering, it transformed our understanding of what colour is as radically as Darwin’s theory of evolution transformed our understanding of biology over the same period. These lectures will examine the nature, classification and teaching of colour from these two very different viewpoints.
The nature of colour (Saturday 8 November 2014, 2-3 pm)
The structure of colour (Saturday 15 November 2014, 2-3 pm)
The teaching of colour (Saturday 29 November 2014, 2-3 pm)
Advance booking strongly recommended. Further details:
By the way, I'm still happy to enter into discussions on this thread, but as I think I've said earlier here, anyone who comes back with ten questions when I answer one will have to be ignored!
November 1st, 2014 #335New User ( Report if Spamming)
- Join Date
- Nov 2014
- Thanked 0 Times in 0 Posts
First of all, I want to say that your site on color is amazing and I'm just starting to study it. I have a question though -- one I'm not sure has been answered here or anywhere else. Roughly speaking, I'm trying to build a mathematical model for the collection of energy in light and connect that to the color picker in Photoshop. I could play around with values and models forever (and I'm willing to try that), but I figured it would be a bit helpful if I could ask you this question first.
Essentially, the color picker (when in hue mode) has 100 values for brightness that scale upwards and downwards vertically (please excuse the simplicity of the question and my explaining -- it's the only way I can figure out how to ask it!). The same is true for saturation on a horizontal scale -- 100 values. What I am trying to figure out is what number to use for the value of light energy when it emits from a light source (say, the sun)(perhaps in lumens? Not sure...), how to calculate how much energy is lost during the travel time to the object being lit (Earth, in this question -- or objects on Earth), how to calculate how much energy is absorbed by the first contact between light and an 'object' (the atoms that construct the object), and then, after following the light ray through the environment, where that final value (the amount of energy lost) will cause the picker to exist on the color square in Photoshop (essentially, how much brightness and saturation).
It sounds simple, but I have no idea where to start studying for this kind of calculating. I've done searches on 'raytracing', but am immediately confronted by obscure terminology and a steep learning curve. I figured that I could create various models and arbitrarily give a value to light energy at the moment it emits from the sun, give an arbitrary value for the amount at which energy is lost per unit of measurement (93 million miles from the sun, I believe), then arbitrarily give an absorption rate (light reflectance value (LRV)? Not sure if this is the right term, but I saw it on the net), then arbitrarily say where the color picker exists at that moment in the 'life' of the ray -- say, at 80 on the brightness scale and at some arbitrary location on the saturation scale. Then, I could give an equally arbitrary representation value for what the 100 percentages on the color square (in Photoshop) covers in terms of the light values.
Essentially, let's say I arbitrarily said the value out of the sun was 6000 (lumens, lux or whatever term is used to measure light energy), then said it was 5200 when it got to earth, then said it was 4000 after being absorbed and reflected by a 'red' material (shiny red apple, let's say -- diffuse specular, I believe), then said it was at 89 (fully saturated (100) and at 89 on the brightness scale). THEN, said what the 100 percentages stood for -- 100 lumens of change or 3000 lumens of change. That would tell me, roughly speaking (if I could follow all of the bounces) what brightness level to paint the object at. Obviously, I'd say that the 100 percentage points on the color square in Photoshop would represent a wide range of numerical values (of light changing in value). I doubt it would line up 100 for 100. It's likely to cover a large numerical value range of light energy values... but the problem is that I have no idea where to start pulling these values from.
Equally as much, I realize that raytracers are probably calculating light like this and that we HAVE figured out the values (for absorption, light loss over unit of measurement and the value to give light at its 'emittance point' (if that's a term)). I just have no entry point in the current books and information on the net that I've found. I need some kind of nudge to get to the next step or I'm going to be playing around A LOT with arbitrary value changes in a 'roughly' mathematical model for how light works.
I realize that my question is very rudimentary. For this, I apologize, but I have actually worked for a while to even get to this point (sadly, haha).
I did the same thing with linear perspective when I was studying it. I took everything all the way to matrix math and gradually realized that it's impossible to use matrix math as an artist for linear perspective. I found it liberating to know how perspective ultimately worked in computer graphics so that I could bend the rules and calculate things more roughly than exactly. I'm trying to do the same thing for light here, but lack that ability to make 'connections' -- connections between the color picker setup in Photoshop and the basic mathematical setup for light energy loss/absorption/reflection and, ultimately, color vision.
If you're able to give me any help, I'd really appreciate it.
Thanks so much!
November 2nd, 2014 #336
Well, your quest to track things back to the sun sounds like complete madness to me, but the site should help you to understand exactly what brightness and saturation mean in the colour picker.
Note that "brightness" here is actually relative brightness compared to the maximum possible for a given hue and saturation, and is very different from perceived lightness (= L). Note also that both "brightness" and "lightness" are scaled according to human perception, not physical energy.
Our real task is to take the light at each point in the visual field and create a set of image colours that at least suggest the effect of those lights. This almost inevitably involves substantial "fudging", in that to preserve the physical difference in energy coming from lights or highlights we would often have to paint everything else much darker than most people would want to.
November 2nd, 2014 #337New User ( Report if Spamming)
- Join Date
- Nov 2014
- Thanked 0 Times in 0 Posts
Thank you so much for the reply, Briggsy.
I'll examine the site locations you linked to. I realize now that it is too difficult to light in this way. I just needed some advice to help me on my trek with art. I'm going to work out a more simplistic model for lighting as a concept artist.
- Mr GetDown,
- Chad Blevins,
- Happy Satan,
- Peter Coene,
- karta tajba,
- Dr. Prof,
- The Colorado Kid,
- Drive By Uppercut,
- Jingai Jigokumoto,
- Anthony Davis,
Tags for this Thread