Mecha-sculptor by 3evan...

[PaoloF]

And finally I decided ...

My name is Paul Fabiani, and for some years (since 2004) I began to devote myself to sculpture in a more serious, particularly as the subject of Mecca ...
Work as Illustrator and Graphic design, and for some time, together with the other two of my brothers, I opened a small business http://3evan.it, where sale and sell all my "Mecha" and subjects.

After considerable time spent reading everything that's on the forum, I decided to show something of my own.
I hope that my work will like and find a place to improve and grow.
a greeting to all

P

The one below is one of my recent work, based on one of my first realized Mecha ..

http://farm4.static.flickr.com/3242/3741795531_f0c320052d.jpg
http://farm3.static.flickr.com/2642/3742589252_f67c032622.jpg
http://farm3.static.flickr.com/2447/3741795671_1a79c50844.jpg

pelvis
http://farm3.static.flickr.com/2561/3742589498_552741ffd4.jpg

The legs you see in the picture, are those of the Masters before, so to give an 'idea of proportion. Her, put the photos in the coming ...

http://farm4.static.flickr.com/3493/3741801737_ea4e4ccd83.jpg
http://farm3.static.flickr.com/2491/3742595064_d2d8ff4be6.jpg
http://farm4.static.flickr.com/3472/3741801935_7b827640fb.jpg
http://farm3.static.flickr.com/2422/3741802017_efe9279f16.jpg

The shoulder is still to be finished, with other mechanical and various details ....

http://farm4.static.flickr.com/3425/3741816755_4178b140ca.jpg
http://farm3.static.flickr.com/2621/3741816675_e2cb5eeb72.jpg

Thx to All
:)http://farm3.staticflickr.com/2443/4045230980_ea62b5837f_z.jpg?zz=1

[PaoloF]

Hay All!!!
returned from vacation with some news, I shall soon show the latest New on my work.

http://farm3.static.flickr.com/2433/3789649474_5b5994e182.jpg
http://farm4.static.flickr.com/3506/3788839263_cbc06a3212.jpg
http://farm4.static.flickr.com/3241/3788838711_8d9f7019ff_o.jpg
http://farm4.static.flickr.com/3423/3788829925_306b7f3a96_o.jpg
http://farm3.static.flickr.com/2424/3788842655_596c0d9f71.jpg

I went far enough, despite still lacking a bit, but is progressing well and I'm quite satisfied!
The photos date back a few weeks ago, while the work went on ..
Waiting for your comments and to add new pictures, I greet you and see you soon

P

[El Jeremie]

Nice mecha, but he lacks some exhauted pipes in his back, but this is just my personal taste.

[PaoloF]

Nice mecha, but he lacks some exhauted pipes in his back, but this is just my personal taste.

Thanks for the compliment!
In fact, on the back, still missing all the tubes and other details, such as reactors and a part that should remind the backbone of the model.
However, as soon as I can, I put the new pictures of how work is progressing.
again thanks and see you soon

P

[EndTurn]

Hey Paolo,
Really like your work. I checked out your website and thought your mecha on there were very impressive as well. I like some of the roughness with this piece and wonder if you will be keeping that, or if it will end up more smooth and polished like the other robots?
I am working on similar sculptures, although I have been working with more found materials and less sculpted from scratch parts. I am struggling a little with some of my joints, and I was wondering if you could elaborate a little on your process with the joints specifically. I looks like they are cast. Are the ball and socket arm joints from a previous sculpt ( they look similar to one on your site)? Did you sculpt the joints originally then cast them, or are they cast from some other kit? Just curious. I'm been kinda scrapping by with my crude dremel tooling joints and am looking for another solution. Also, do you do your own casting, or do you send the pieces out?
Thanks, keep up the good work!

[PaoloF]

Hey EndTurn
Meanwhile, I apologize for the delay in answer you!
Then ....


Hey Paul,
Really like your work. I checked out your website and thought your mecha on there were very impressive as well. I like some of the roughness with this piece and wonder if you will be keeping that, or if it will end up more smooth and polished like the other robots?


Thanks for the compliments and to appreciate our work! It's always very pleased to see that we have chosen desgin attract 'attention.
Concerning roughness, yes, I thought I would leave them in places, as I did for the previous model (still with the 4 arms). It 'something I like, and take a good' effect on the finished model.


I looks like they are cast. Are the arm ball and socket joints from a previous sculpt (they look similar to one on your site)? Did you sculpt the joints originally then cast them, or are they cast from some other kit? Just curious.

As regards the joints, most are all home-made pipe plasticards evergreen or resized, or taking advantage of small spheres found in various shops that sell items for architectural models. Other, smaller, you can find on the Internet in some facilmete Shop handling equipment for the model, as hlj.com. You can find them already made in different sizes.
This model is based on one of our previous models, but still, the joints were home-made.


I'm kinda been by Scrapping with my raw Dremel tooling joints and am looking for another solution. Also, do you do your own casting, or do you send the pieces out?
Thanks, keep up the good work!

For the "Casting" all 'the beginning we would produce them (successfully unsatisfactory) then we used a professional who gives us a high quality, while keeping the number of Kit

Essert been useful and I hope I have clarified all your doubts, and you'll continue to follow my work.
Thank you and again and soon.

P.

[KingUnicorn]

I almost missed this thread. So many great works being shared in here and I find that I miss some new contributions.

I'm pleased we've got another mecha specialist in this section of the site. Mechanical design and execution can be daunting and to see it handled so skillfully is inspiring.

I hope you'll keep sharing your progress here. I think your work and ZLuca's projects offer a great balance to the organic pieces that are being shared. Cheers!

~KU

[KingUnicorn]

I almost missed this thread. So many great works are being shared in the sculpture section and I find that I often miss some new contributions.

I'm pleased we've got another mecha specialist in this section of the site. Mechanical design and execution can be daunting and to see it handled so skillfully is inspiring.

I hope you'll keep sharing your progress here. I think your work and ZLuca's projects offer a great balance to the organic pieces that are being shared. Cheers!

~KU

[PaoloF]

Hello and thanks KingUnicorn compliments. I apologize for the delay response, but now I saw the message, =_=....
I really hope that my work can inspire somebody, and this leads him to realize his plans as I did: I started, in fact, seeing the work ZLuca, now I think my "teacher" and to which I I'm inspired to learn and improve even more. until you get to the levels now
Soon, I'll put the photos of the new progress of the work, now well advanced.

So thanks again for 'attention demonstrated and see you soon

P

[PaoloF]

Hello everyone!
Here I am back, with the latest progress made on the template. The work is still far from final say, but the direction is right, then losing Really little. As you can see from the photos, we have made substantial changes, as for the mechanics of the legs and the arms / shoulders. Also, I experienced a new version of the foot, m not sure yet which one to choose (which goes wrong, there I put them both;)! )
Well, I leave you to the photos and see you soon. I hope it is to your liking:)

http://farm3.static.flickr.com/2526/4045223786_6e316ff925_o.jpg

http://farm3.static.flickr.com/2644/4045223636_7e320f0b28_o.jpg

http://farm3.static.flickr.com/2695/4045223948_95e0e5ecf0_o.jpg

http://farm3.static.flickr.com/2555/4045224136_3f7ccce0b5_o.jpg

http://farm3.static.flickr.com/2762/4045224286_953e68baaa.jpg

http://farm3.static.flickr.com/2443/4045230980_a08c1d4a1a_o.jpg

http://farm4.static.flickr.com/3507/4044486129_26e77b36ce_o.jpg

http://farm3.static.flickr.com/2781/4045231614_856de8fc91_o.jpg

http://farm3.static.flickr.com/2522/4044486767_9b5d9b16e4_o.jpg

http://farm3.static.flickr.com/2437/4044493461_910743c80e.jpg

http://farm3.static.flickr.com/2697/4045238830_19639cc30b_o.jpg

http://farm3.static.flickr.com/2551/4044493907_ce8f755450_o.jpg

(Note the small size of the model!)
http://farm3.static.flickr.com/2640/4044494099_5f4fd0a7eb_o.jpg

hello to everyone and see you soon

[takeya00]

Hello everyone!
Here I am back, with the latest progress made on the template. The work is still far from final say, but the direction is right, then losing Really little. As you can see from the photos, we have made substantial changes, as for the mechanics of the legs and the arms / shoulders. Also, I experienced a new version of the foot, m not sure yet which one to choose (which goes wrong, there I put them both;)! )
Well, I leave you to the photos and see you soon. I hope it is to your liking:)

http://farm3.static.flickr.com/2526/4045223786_6e316ff925_o.jpg

http://farm3.static.flickr.com/2644/4045223636_7e320f0b28_o.jpg

http://farm3.static.flickr.com/2695/4045223948_95e0e5ecf0_o.jpg

http://farm3.static.flickr.com/2555/4045224136_3f7ccce0b5_o.jpg

http://farm3.static.flickr.com/2762/4045224286_953e68baaa.jpg

http://farm3.static.flickr.com/2443/4045230980_a08c1d4a1a_o.jpg

http://farm4.static.flickr.com/3507/4044486129_26e77b36ce_o.jpg

http://farm3.static.flickr.com/2781/4045231614_856de8fc91_o.jpg

http://farm3.static.flickr.com/2522/4044486767_9b5d9b16e4_o.jpg

http://farm3.static.flickr.com/2437/4044493461_910743c80e.jpg

http://farm3.static.flickr.com/2697/4045238830_19639cc30b_o.jpg

http://farm3.static.flickr.com/2551/4044493907_ce8f755450_o.jpg

(Note the small size of the model!)
http://farm3.static.flickr.com/2640/4044494099_5f4fd0a7eb_o.jpg

hello to everyone and see you soon

Wow.....Great work!!!

[fealform]

Amazing!!
simply amazing!!

[felixdasilva]

good work :D

[jega74]

Really really really fantastics work!!

[PaoloF]

Thanks to all! Thank you very much!
Happy that the work you like, as long as I'm using to finish the best. Now I went ahead with the work, and as soon as I can, posters and other photos of progress.
Let us be able to finish it by the end of the month as planned .....
Thanks again and see you soon :D

P

[PaoloF]

I apologize for the great absence of this thread ....
Soon publish photos of how the work went ahead!
A Thanks again to everyone and see you soon
P

[Mah ' Crub]

Wow....so much detail, and so small....very nice.....do you have any hair left or have you pulled it all out?


Mah ' Crub

[PaoloF]

eheheheh! In fact, we have gone by ... :)
However, the work is not yet finished at all, therefore, are always at risk :)

Thanks for the compliments and see you soon!!

[PaoloF]

hello all!
Waiting to show the latest updates on the above Mecca, the "Shamag II", I present one of the last born in my house 3evan:

YUMURTA MAN

The one below is one of the last few works written and produced entirely in-house. This is a character created as a star of a sci-fi short story, which would be an artificial being who lives in a futuristic was where the 'expanding to' inner solar system has become a routine! This, would be part of a "body of 'the elite' exploration 'and its low height and size" Roundish "it would facilitate the difficult tasks that should be located to face!

The model was built with Super Sculpey Rosa, while the weapons I used parts of styrene and a 'weapon of a Kit Kotobukiya

That said, let's talk about the pictures and see you soon
Let me know what you think and thanks in advance
:)

Concept
http://farm7.staticflickr.com/6085/6104552954_1527293b97.jpg

http://farm4.static.flickr.com/6065/6104552840_b64da1b143.jpg

http://farm4.static.flickr.com/6071/6104521318_8278f3c860.jpg

Sculpture
http://farm4.static.flickr.com/6066/6104553060_1238f97918.jpg

http://farm3.static.flickr.com/6200/6104556132_457c74fa9c.jpg

http://farm3.static.flickr.com/6194/6104011233_5d796d7dbb.jpg

http://farm3.static.flickr.com/6196/6104556466_8ecfa4759d.jpg


http://farm3.static.flickr.com/6083/6149604675_f1f60d004f.jpg

http://farm3.static.flickr.com/6199/6150155282_5e969de9a7.jpg

http://farm3.static.flickr.com/6197/6150152222_a548779e3c.jpg

http://farm3.static.flickr.com/6178/6150152024_58eba43974.jpg

http://farm3.static.flickr.com/6087/6124386120_6dba6809b6.jpg

http://farm3.static.flickr.com/6074/6123842137_4931d81fa9.jpg

http://farm3.static.flickr.com/6190/6124373880_fddf1825aa.jpg

http://farm3.static.flickr.com/6012/6197179517_8e3a108eab.jpg

http://farm3.static.flickr.com/6173/6197693790_a68fa73372.jpg

Finished Model
http://farm7.staticflickr.com/6111/6272533956_a9340af025_z.jpg

http://farm7.staticflickr.com/6231/6272006197_7e59a93db7_z.jpg

http://farm7.staticflickr.com/6117/6272533618_dc8b4deafc_z.jpg

http://farm7.staticflickr.com/6108/6272001357_bf88649126_z.jpg

http://farm7.staticflickr.com/6218/6272528958_fa2a0cd83e_z.jpg

http://farm7.staticflickr.com/6224/6272528824_df88d5a70a_z.jpg

http://farm7.staticflickr.com/6045/6272528708_e73351ceff_z.jpg

http://farm7.staticflickr.com/6039/6272000781_544da8bbf7_z.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/301561_191249974286731_130942506984145_424485_6136 92837_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/317054_191250027620059_130942506984145_424486_1102 528266_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/296007_191250047620057_130942506984145_424487_1140 832903_n.jpg


The Kit!!
Cover + Istruction

http://farm7.staticflickr.com/6038/6272012017_aef3c9cbf6_z.jpg

http://farm7.staticflickr.com/6117/6272539460_7f21acb7a7_z.jpg

http://farm7.staticflickr.com/6218/6272539352_9b3e92f4f1_z.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/312638_2616100525089_1332368503_4244000_695208569_ n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/316231_2616100165080_1332368503_4243999_1479060332 _n.jpg


See you soon :)
P

[PaoloF]

prejudice to all
It 'a little that I do not write or audience something, so I apologize for this ...

"Hover Bike"
Below, I present you one of my recent projects, still under construction. This is a Flying Motorcycle, or "Hover Bike" Considerable size (call it bike is indeed simplistic!) 'S thinking about something I made Wipeout style (the famous racing game of the A-Grav PS), a world where motorcycle races, you make a horse like that of cars on runways!
But even as a military, since I expected an armed version ....

The model was created by assembling together several containers of shampoo and soap, plus a few pieces from the box of precious ananzi. For the moment, is only a test, a sketch, to verify the large holdall and volumes that will be when finished.
The pilot himself, made with Super Sculpey Rosa is only a test, since the final one will be a little smaller ..
The scale of the model is 1/35!

That said, let's talk about the pictures and see you soon
Let me know what you think and thanks in advance
:)

Concept

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/388155_220060211405707_130942506984145_499508_1324 297193_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/388728_220064554738606_130942506984145_499523_1906 568772_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/390236_221720367906358_130942506984145_503805_5698 60213_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/390929_221720407906354_130942506984145_503806_1396 982403_n.jpg

Scratch Build Model WIP

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/388885_220059634739098_130942506984145_499499_7405 34748_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/381269_220705074674554_130942506984145_501102_1822 2580_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/383578_220705108007884_130942506984145_501103_1624 722268_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/381580_220705141341214_130942506984145_501104_1941 237934_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash2/s720x720/166904_220705284674533_130942506984145_501107_2437 90486_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/380136_220705361341192_130942506984145_501109_6218 50677_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/s720x720/385975_220705254674536_130942506984145_501106_2029 436823_n.jpg

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/385803_220705468007848_130942506984145_501112_1544 329936_n.jpg



see you soon and thanks to all

[wunts]

totally wicked fun, looks like your having there... great sketches for the concepts too.

[PaoloF]

Thank you very much for the compliments!
In fact, even if it looks bad, is part of the Good, ahahahahah! ;)

The model is already present as a kit, to assemble and paint. Now, I just have to get one, to give him the official color ....

Thanks again and see you soon

[PaoloF]

Hello everyone
I apologize for the lack of updates to the post! I am working on a project on commission, and, when finished, will take up with the updates on the work of Maccha and the Hover Bike!

see you soon and thanks to all

P

[Temjin]

Amazing skills! Keep them coming, want to see more. :)

[PaoloF]

I'm glad you like them. soon, I will put the new updates of the work, and painted a version of "Yumurta Man."
thanks again :)

P

[P E N Ricklund]

Cool Paolo, nice to see more of the stuff. didn't realise the white one was the first one. Really impressive in real life. Thanks for sharing, keep us posted.

[PaoloF]

Thanks for the compliments PEN!
Ending building the White, now, has become a Mission! :)

Thank so much and see you soon with a new update

[Tad]

Cool stuff man,
some of it looks a bit unfinished, but I love the shapes and design

[PaoloF]

thanks Man
Tes, many jobs are still in working progress Phase, but also in the near future will put the photos of those that have been terminated ... :)

thanks again :)

[PaoloF]

Hello to all
Here I am again, with my last job!
This was the cause of my absence from the forum, and why many of the other works, are still Work in Progress.


These are photos of my latest work on commission, created for the "Ammon Miniature"http://ammon-miniatures.com/portail/ a French company that deals with collectible miniatures. The Tank is the first in a series of vehicles (style "cartoons") who will be joined by Pin Up style World War II. The Pin Up, in 32mm, will be sculpted by Zak Valentin.
The whole kit will be made of resin, to assemble and paint.
The size of the tank, as you will see from the photos, are very small. Measure, namely: 4.5 inches Width 4.5 inches Height-5.5-cm length.

This is a 'preview, then put the photos of the whole realization of the model, and a copy (free) painted ....
The wagon will be available from March, directly on the site of Ammon Miniatures.

I hope you like it, as was pleasing to me :)
Thank you all and see you soon

P

Artwork

http://farm8.staticflickr.com/7203/6917928051_5237417043_z.jpg

Model

http://farm8.staticflickr.com/7198/6777295986_718ba3bd75_z.jpg

http://farm8.staticflickr.com/7179/6923410789_b009061182_z.jpg

http://farm8.staticflickr.com/7065/6923410903_6381b70f47_z.jpg

http://farm8.staticflickr.com/7205/6777299736_968c66af25_z.jpg

http://farm8.staticflickr.com/7192/6923414669_6f6de7d5dd_z.jpg

http://farm8.staticflickr.com/7052/6777296438_8de1a0e4ae_z.jpg

http://farm8.staticflickr.com/7042/6923418879_85c3a18519_z.jpg

http://farm8.staticflickr.com/7065/6777307992_e9e2797ba4_z.jpg

Details

http://farm8.staticflickr.com/7066/6777303684_c9a86e0e50_z.jpg

http://farm8.staticflickr.com/7183/6923418651_b2d4733b02_z.jpg

Dimension

http://farm8.staticflickr.com/7069/6777307702_2951cd929b_z.jpg

http://farm8.staticflickr.com/7043/6777296610_6776ac63a8_z.jpg



http://farm8.staticflickr.com/7057/6777313474_eb0fbc5f2c_b.jpg

Another Images
http://www.flickr.com/photos/3evan_studio/
https://www.facebook.com/3evan

[ourouk]

great one ! Such a lot of détails despite this size...
You give me motivation to put concentration in the final touch, thanks.
-"he made it, i can"...:teeth:

[PaoloF]

thanks Man
I am happy to be of 'aid or inspiration in some way, for your work :)
Yes, if the 'I made it, you can do :D

[1-thought]

Do you do freelance or contract work? please contact me
jrvosovic@gmail.com

[nhokmaru]

I think that is a great modelling sculpture...Maybe it would be awesome if someone were to turn it into 3D model

[PaoloF]

Do you do freelance or contract work? please contact me
jrvosovic@gmail.com

hello
I just sent an email to your email address.
hello

PaoloF

[PaoloF]

I think that is a great modelling sculpture...Maybe it would be awesome if someone were to turn it into 3D model

Thank you! :)
I'm glad you like it. Now there is to see that in painting, full of Pin Up.

Doing it in 3D!? It would be an 'idea ..... maybe in a nice CGI animation!

Thanks again and see you soon

P